Uses of the Clip MCW Curtiain PIR

Option 1. The Clip can be installed on a wall with the infrared detector facing down and across creating a curtain across your entire room.

Option 2. The Clip can be installed on the ceiling with the infrared detector again facing down creating a curtain across your entire room.

Option 3. The Clip can be installed on a wall with the infrared detector facing across creating a curtain across your entire room. It can be installed at any height. For example to cover a Skylight, Entrance to a loft hatch or half way down a set of stairs.

Option 4. The Clip can be installed on a wall with the infrared detector facing up and across creating a curtain across your entire room, But set high enough to all your pet to pass under the curtain thus creating a pet alley. We also use this in the revel of windows to cover the upper portion of your window. Great for those windows with a strip of windows that open at the top.

Option 5. The Clip can be installed on a wall close to a door jam to cover entrance and exit to that door. This means the door can be left open but is still cover by your alarm. It could also be install as in option 4 half way up the door to allow a pet alley.

Setting in the Clip can allow you to control the range of the curtain, to make the unit suitable for any application of your choice. There is no other similar device currently on the market.

Window Kit 1 - Clip MCW

Window Kit 1 ( 1 Off Curtain Clip T MCW PIR)

Viewcare has created window kit system to allow the Powermax+ Alarm to be use as a perimeter system when in 'Home' mode. This will allow you to have your alarm fully armed ( in Home Mode) while you or your family are in your house or flat. To do this we have used the Visonic Clip T MCW Curtain PIR as this will also allow you to have your windows open but you are still protected.

When using a Clip Curtain PIR you are sending 2 (Curtains) parallel beams of infra red light that both need to be broken to set of the detector off. The beams are approximately 6 mm (1/4 inch) apart at the PIR and 300 mm (12 inches) at 2 meters, 600 mm (24 inches) at 4 meters and 1000m at 6 meters. As most windows are less that 2 meters wide the the beams should be 200-300 mm at the widest point. Remember to set off the alarms you need to break both beams, so most of the time unless you are trying to climb out of your own window you should not set the alarms off.

For ideas on how to use a curtain pir click here

Installion Information on our Window Kits click here

List Price: ~~Ł68.55~~

Price: Ł45.11 (Ł53.00 Inc. Vat)

Email Friend

Window Kit 2 - Clip MCW

Window Kit 2 ( 2 Off Curtain Clip T MCW PIR)

Viewcare has created window kit system to allow the Powermax+ Alarm to be use as a perimeter system when in 'Home' mode. This will allow you to have your alarm fully armed ( in Home Mode) while you or your family are in your house or flat. To do this we have used the Visonic Clip T MCW Curtain PIR as this will also allow you to have your windows open but you are still protected.

When using a Clip Curtain PIR you are sending 2 (Curtains) parallel beams of infra red light that both need to be broken to set of the detector off. The beams are approximately 6 mm (1/4 inch) apart at the PIR and 300 mm (12 inches) at 2 meters, 600 mm (24 inches) at 4 meters and 1000m at 6 meters. As most windows are less that 2 meters wide the the beams should be 200-300 mm at the widest point. Remember to set off the alarms you need to break both beams, so most of the time unless you are trying to climb out of your own window you should not set the alarms off.

For ideas on how to use a curtain pir click here

Installion Information on our Window Kits click here

List Price: ~~Ł127.10~~

Price: Ł90.22 (Ł106.01 Inc. Vat)

Email Friend

Clip PowerCode Wireless Curtain PIR